Toro 72967 6000 Series MyRIDE® 60″ 31 HP 921cc

SET UP AND PREP FEES MAY APPLY 

• Engine
  31 HP* (23.12 kw) Kawasaki® FX 921cc
• Fuel Capacity
  Gasoline – 12 gallons (45 L) single-point fill
• Adjustable Discharge Baffle
  Standard, tools-free
• Air Filter
  Heavy-Duty Canister Air Cleaner
• Blade Tip Speed
  18,500+ ft/min (5,640 m/min)
• Blade Type
  1/4″ (6 mm) thick heat-treated steel
• Carrier Frame
  3″ x 1-1/2″ (7.6 cm x 3.8 cm) tubular steel
• Caster Tires
  13″ x 6.5″- 6″ (33 cm x 16.5 cm – 15.2 cm) flat-free semi-pneumatic
• Deck Design
  80-Grade 7-Gauge 60″ (152 cm) TURBO FORCE® w/bull-nose bumper
• Discharge Chute
  Rubber
• Drive System
  Hydraulic unitized pumps and wheel motors
• Drive Tires
  24″ x 12″ – 12″ (61 cm x 30.5 cm – 30.5 cm)
• Ground Speed
  11.5 mph (19 km/h) forward
• Height of Cut
  1″ – 5.5″ in 1/4″ (2.5 – 14 cm in 6 mm) increments
• Hour Meter
  Standard
• Hydraulic Fluid
  Premium synthetic
• ROPS
  Folding; standard
• Comfort Platform
  MyRIDE® Suspension System
• Platform Travel
  3.6″
• Shocks
  1 Center / 2 Rear
• ISO Mounts
  Qty 4, 2.5″ 3-D isolation mounts
• Seat
  Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
• Adjustability
  5 point adjustment on rear shocks
• Spindle Bearings
  Greaseless ball bearings
• Spindle Housing
  9″ (22.9 cm) diameter cast aluminum
• Steering Controls
  1-5/8″ (4 cm) dia. levers; adjustable” (4 cm) dia. levers; adjustable
• Warranty  5 Years-1400 Hours,  Engine 3 Years

Deluxe Handcrafted Seat with Arm Rests

Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.

___________________________________________________________________________________________

MyRIDE® Suspension System

The suspended operator platform allows up to 3.6” of travel (depending on model) and reduces impacts, bumps and vibrations. Easily and quickly adjust rear shock ride settings to personal ride preferences, without tools!

___________________________________________________________________________________________

Exclusive TURBO FORCE Deck

High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.

____________________________________________________________________________________________

7-Gauge, High-Strength Steel

The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

____________________________________________________________________________________________

A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

____________________________________________________________________________________________

Rubber Discharge Chute

High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

____________________________________________________________________________________________

Smarter design in a bull-nose bumper.

7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4″ (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf “plowing” during spring and fall clean-up also is significantly reduced.

____________________________________________________________________________________________

Folding Rollover Protection System ROPS

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

___________________________________________________________________________________________

Smooth, Powerful Response

The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You’ll get a smoother, faster response while enjoying an even more reliable machine.

____________________________________________________________________________________________

Patented Adjustable Baffle

Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.

____________________________________________________________________________________________

Operator Information Center

The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system

____________________________________________________________________________________________

Cast Aluminum Spindle

Cools quickly for enhanced durability and performance.